Bogen M300 M-Class Power Amplifier - New

CONDITION: NEW

Bogen's M-Class series is designed for reliability, flexibility, and power, and features three modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Additional features include Bogen's patented Back-Slope circuitry for regulating the proper amount of AC energy from the amplifier's power toroid, an energy-saving Sleep Mode, and support for up to two input modules with up to two priority settings with the ability to add other modules as needed.

• Bogen M300 Features:

  • 3 modes of operation to choose from - Stereo, Dual Mono, or 70V Mono

  • Low noise, low distortion, and high slew rate

  • Flexible modular input capability (2 module capacity)

  • Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included

  • 3 selectable low-frequency, roll-off choices

  • 2x1 mixer function when in mono modes

  • Insert connections for outboard equipment (in mono modes)

  • Post- and Pre-EQ Output Feeds (summed mono out in stereo mode)

  • DC, overload, short circuit, and thermal protection circuits Clip limiting circuits for speaker protection

  • Power-saving Sleep Mode for intermittent use applications

  • Status, Signal, and Clip/Limit indicators

  • Back-Slope AC voltage stabilization for dependable performance over varying AC line voltages

  • Heavy-gauge steel chassis with cast aluminum front panel

  • Recessed volume control knobs with snap-on protective cover

  • Mounts in 2 rack spaces (3-1/2") directly stackable without need for extra space above or below

  • 2 independent, continuously variable, cooling fans for dependable and quiet operation

  • Easily removable front fan grilles with filters

  • Stable into 2-ohm loads

  Bogen M300 Specifications:

  • Power Output:

    • 70V Mono: 600W @ 8 ohms

    • 4-ohm: 300W per channel

    • 8-ohm: 200W per channel

  • Input Sensitivity: 0.840V for 300W @ 4 ohms

  • S/N Ratio (20K BW): 103 dB ref. 8 ohms, F.P.

  • Class of Operation: AB

  • Product Weight: 41 lbs

  • Connectors:

    • Power: 15A line cord

    • Input: 2 new Bogen std. 12-pin connector modules/RCA input

    • Output: 5-pin "touch-proof" Barrier Strip, RCAPre- & Post-EQ Output

  • Power Bandwidth: 20-40kHz .5% THD

  • THD @ 1 kHz rated power: less than .02%

  • Load Impedance: 4-8 ohms, 70V

  • Minimum Load Impedance (Stereo): 3.2 ohms

  • Frequency Response @ 1 watt: 20-20kHz +/-0.25dB

  • Output Regulation:

    • 1kHz Direct: 0.5dB @ 8 ohms

    • 1kHz Bridged: 1.5dB @70V

  • Inputs (Plug-in modules): Electronically balanced, high-impedance module standard, other modular input types available

  • AC Input Voltage Range: 95-130V AC, 60Hz

  • Maximum AC Current: 12A

  • Indicators: Status (On/Protect/Sleep), Clip/Limit, Signal

  • Temperature Range: 15° to 105°F

  • Cooling: Forced Air Variable Speed Fan

  • Dimensions (W x H x D): 17" x 3 1/2" x 16"

  • Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Circuit-Breaker, Short Circuit

  • Special Features: Sleep Mode, Back-Slode regulation, Stereo, Dual Mono,70V Mono Operation, Toroidal Power Transformer

WARRANTY: 1-YEAR REPLACEMENT WARRANTY

NOTE: PRODUCTS FROM BOGEN ARE NOT RETURNABLE PER MANUFACTURER POLICY. - SEE WARRANTY POLICY PAGE FOR DETAILS