Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
CONDITION: NEW
The CPC-4 has four independent channels of CPC generation. Each channel will generate a CPC disconnect signal on a PABX analog station (or any other line that does not provide this signal).
A CPC (Calling Party Control) signal is a momentary break in phone line loop current, which is used to signal automated telco equipment (ie. voice mail, call sequencers, etc.) that the distant party has hung up. Central Office telephone lines typically provide this signal, but analog PABX stations do not.
The CPC-4 will generate a 1 second disconnect when it detects a busy signal, reorder tones (fast busy), return to dial tone, or silence.
Features:
Viking calling party control - generate CPC disconnect signals on four separate phone lines
Phone line powered (no AC needed)
Handle 4 lines in 1 unit
Generates CPC disconnect on: Return to dial tone (programmable), Busy signal, Reorder (fast busy), Steady silence (programmable)
LED shows: In use, Audio detected, Generated CPC signal
Caller ID compatible
Power: Telephone line powered (20VDC, 20mA minimum)
Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
Shipping Weight: 1.13Kg (2.5 lbs)
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
CPC Disconnect Time: 1 second nominal
Connections: 4 position screw terminal block
Applications:
Tandem PABX configuration
Analog PABX station to trunk talk paths between two PABXs
Voice mail behind PABX
Add CPC disconnect signal to T-1 channel bank lines
Call sequencers behind PABX
VOIP modems
WARRANTY: 1-YEAR MANUFACTURER WARRANTY
NOTE: PRODUCTS FROM VIKING ARE NOT RETURNABLE - SEE WARRANTY POLICY PAGE FOR DETAILS
CONDITION: NEW
The CPC-4 has four independent channels of CPC generation. Each channel will generate a CPC disconnect signal on a PABX analog station (or any other line that does not provide this signal).
A CPC (Calling Party Control) signal is a momentary break in phone line loop current, which is used to signal automated telco equipment (ie. voice mail, call sequencers, etc.) that the distant party has hung up. Central Office telephone lines typically provide this signal, but analog PABX stations do not.
The CPC-4 will generate a 1 second disconnect when it detects a busy signal, reorder tones (fast busy), return to dial tone, or silence.
Features:
Viking calling party control - generate CPC disconnect signals on four separate phone lines
Phone line powered (no AC needed)
Handle 4 lines in 1 unit
Generates CPC disconnect on: Return to dial tone (programmable), Busy signal, Reorder (fast busy), Steady silence (programmable)
LED shows: In use, Audio detected, Generated CPC signal
Caller ID compatible
Power: Telephone line powered (20VDC, 20mA minimum)
Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
Shipping Weight: 1.13Kg (2.5 lbs)
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
CPC Disconnect Time: 1 second nominal
Connections: 4 position screw terminal block
Applications:
Tandem PABX configuration
Analog PABX station to trunk talk paths between two PABXs
Voice mail behind PABX
Add CPC disconnect signal to T-1 channel bank lines
Call sequencers behind PABX
VOIP modems
WARRANTY: 1-YEAR MANUFACTURER WARRANTY
NOTE: PRODUCTS FROM VIKING ARE NOT RETURNABLE - SEE WARRANTY POLICY PAGE FOR DETAILS
