Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
CONDITION: NEW
Viking’s K-2000-DVA is a fully programmable multi-input, multi-number auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000-DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to one minute in length specific to that input. The messages can be recorded locally or remotely.
When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection. The K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
The K-2000-DVA can be programmed with a touch tone phone or a PC with a serial port connection.
Features:
Non-volatile memory, no batteries required
Stores up to eight 32-digit phone numbers per input (sixty-four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Phone numbers may be programmed as pager numbers (no voice message played)
Programmable hookswitch flash before dialing
Line level input for loading pre-recorded messages into the unit
WARRANTY: 1-YEAR MANUFACTURER WARRANTY
NOTE: PRODUCTS FROM VIKING ARE NOT RETURNABLE - SEE WARRANTY POLICY PAGE FOR DETAILS
CONDITION: NEW
Viking’s K-2000-DVA is a fully programmable multi-input, multi-number auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000-DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to one minute in length specific to that input. The messages can be recorded locally or remotely.
When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection. The K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
The K-2000-DVA can be programmed with a touch tone phone or a PC with a serial port connection.
Features:
Non-volatile memory, no batteries required
Stores up to eight 32-digit phone numbers per input (sixty-four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Phone numbers may be programmed as pager numbers (no voice message played)
Programmable hookswitch flash before dialing
Line level input for loading pre-recorded messages into the unit
WARRANTY: 1-YEAR MANUFACTURER WARRANTY
NOTE: PRODUCTS FROM VIKING ARE NOT RETURNABLE - SEE WARRANTY POLICY PAGE FOR DETAILS
