Tn2400:2401.png
Tn2400:2401.png

Avaya Definity TN2400 / TN2401 Net/Pkt Interface Circuit Packs - Refurbished

$195.00

Features:

  • The TN2401 Net/Pkt Interface replaces the TN794 and grants access to the functionality of the TN777B NETCON.

  • Inserts into control carrier slot that was used by the TN777B NETCON/ This interface is required for the si model to save translations to the new 5-volt ATA flash memory card.

  • The sandwich board assembly and the TN2404 processor is required for the following upgrades:

    • A G1 or G3iV1 MCC with a TN773 Processor

    • An s, i, or si system with a TN786B Processor when reusing the existing control carrier cabinet

    • An si system with a TN790 or TN790B Processor. Any R5 or R6 system will have the old control carrier backplane and will require the TN2401/TN2400. For R7 and R8 systems, it is possible to have the old control carrier backplane or the new control carrier backplane. The old backplane is being used if the system has a TN794/TN2400 in the Network Control and Packet Control Slots

    • If nothing is in the Packet Control Slot, then the new backplane exists

WARRANTY: 90-DAY REPLACEMENT WARRANTY / FINAL SALE

Quantity:
Add To Cart

Features:

  • The TN2401 Net/Pkt Interface replaces the TN794 and grants access to the functionality of the TN777B NETCON.

  • Inserts into control carrier slot that was used by the TN777B NETCON/ This interface is required for the si model to save translations to the new 5-volt ATA flash memory card.

  • The sandwich board assembly and the TN2404 processor is required for the following upgrades:

    • A G1 or G3iV1 MCC with a TN773 Processor

    • An s, i, or si system with a TN786B Processor when reusing the existing control carrier cabinet

    • An si system with a TN790 or TN790B Processor. Any R5 or R6 system will have the old control carrier backplane and will require the TN2401/TN2400. For R7 and R8 systems, it is possible to have the old control carrier backplane or the new control carrier backplane. The old backplane is being used if the system has a TN794/TN2400 in the Network Control and Packet Control Slots

    • If nothing is in the Packet Control Slot, then the new backplane exists

WARRANTY: 90-DAY REPLACEMENT WARRANTY / FINAL SALE

Features:

  • The TN2401 Net/Pkt Interface replaces the TN794 and grants access to the functionality of the TN777B NETCON.

  • Inserts into control carrier slot that was used by the TN777B NETCON/ This interface is required for the si model to save translations to the new 5-volt ATA flash memory card.

  • The sandwich board assembly and the TN2404 processor is required for the following upgrades:

    • A G1 or G3iV1 MCC with a TN773 Processor

    • An s, i, or si system with a TN786B Processor when reusing the existing control carrier cabinet

    • An si system with a TN790 or TN790B Processor. Any R5 or R6 system will have the old control carrier backplane and will require the TN2401/TN2400. For R7 and R8 systems, it is possible to have the old control carrier backplane or the new control carrier backplane. The old backplane is being used if the system has a TN794/TN2400 in the Network Control and Packet Control Slots

    • If nothing is in the Packet Control Slot, then the new backplane exists

WARRANTY: 90-DAY REPLACEMENT WARRANTY / FINAL SALE

You Might Also Like

Avaya Definity TN2464BP DS1 Interface Circuit Pack - Refurbished
$189.00
Avaya Definity TN2182 Tone Clock Circuit Pack - Refurbished
$49.00
Avaya Definity TN726B 8-Port Data Line Circuit Pack - Refurbished
$245.00
Avaya Definity TN591 FP/VSP-CPU Board - Refurbished
$79.00
Avaya 120A4 Channel Service Unit Module - Refurbished
$65.00