Viking BLK-4 LED Strobe Light Kit - New
Features:
Ringing Phone or TTY indication for the hearing impaired
Ringing phone indication in loud warehouses and factories
Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc.
Alarm indication for security systems or alarm panels with phone dialers
Durable polycarbonate lens
High output long life LED technology
Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash
6 programmable beacon and strobe brightness settings
Immune to shock and vibration
Flush mount or surface mount with weatherproof single gang box (included)
3/4” knockouts for connecting conduit, etc.
Strobe and control module may be installed separately
Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure
One set of (NO) normally open and (NC) normally closed relay contacts provided
Selectable ring cadence mode (strobe light will remain flashing between rings)
Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
On/off switches for ring detection and off-hook/loop detection
Disable input, ideal for use with two-button emergency phones like Viking’s E-1600-20A (DOD# 215), will not activate strobe light on “Info” calls
Power: 120V AC to 12V DC adapter provided
Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft
Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0”)
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -26° to 54°C (-15° to 130° F)
Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
Minimum Loop Current: 15 mA
Minimum Ring Voltage: 25V RMS
Ringer Equivalence: 0.5 A REN
Disable/Info Switch Input: 50mA/80mW maximum
Humidity - BLK-4: 5% to 95% non-condensing
Mounting: Fasten to wall, post, etc. with complete surface mounting hardware included
Connections: Color coded wires with gel-filled butt connectors
Color: Blue
Country of Origin: USA
WARRANTY: ONE-YEAR MANUFACTURER WARRANTY
FINAL SALE/NON-RETURNABLE ITEM
Features:
Ringing Phone or TTY indication for the hearing impaired
Ringing phone indication in loud warehouses and factories
Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc.
Alarm indication for security systems or alarm panels with phone dialers
Durable polycarbonate lens
High output long life LED technology
Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash
6 programmable beacon and strobe brightness settings
Immune to shock and vibration
Flush mount or surface mount with weatherproof single gang box (included)
3/4” knockouts for connecting conduit, etc.
Strobe and control module may be installed separately
Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure
One set of (NO) normally open and (NC) normally closed relay contacts provided
Selectable ring cadence mode (strobe light will remain flashing between rings)
Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
On/off switches for ring detection and off-hook/loop detection
Disable input, ideal for use with two-button emergency phones like Viking’s E-1600-20A (DOD# 215), will not activate strobe light on “Info” calls
Power: 120V AC to 12V DC adapter provided
Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft
Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0”)
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -26° to 54°C (-15° to 130° F)
Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
Minimum Loop Current: 15 mA
Minimum Ring Voltage: 25V RMS
Ringer Equivalence: 0.5 A REN
Disable/Info Switch Input: 50mA/80mW maximum
Humidity - BLK-4: 5% to 95% non-condensing
Mounting: Fasten to wall, post, etc. with complete surface mounting hardware included
Connections: Color coded wires with gel-filled butt connectors
Color: Blue
Country of Origin: USA
WARRANTY: ONE-YEAR MANUFACTURER WARRANTY
FINAL SALE/NON-RETURNABLE ITEM
Features:
Ringing Phone or TTY indication for the hearing impaired
Ringing phone indication in loud warehouses and factories
Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc.
Alarm indication for security systems or alarm panels with phone dialers
Durable polycarbonate lens
High output long life LED technology
Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash
6 programmable beacon and strobe brightness settings
Immune to shock and vibration
Flush mount or surface mount with weatherproof single gang box (included)
3/4” knockouts for connecting conduit, etc.
Strobe and control module may be installed separately
Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure
One set of (NO) normally open and (NC) normally closed relay contacts provided
Selectable ring cadence mode (strobe light will remain flashing between rings)
Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
On/off switches for ring detection and off-hook/loop detection
Disable input, ideal for use with two-button emergency phones like Viking’s E-1600-20A (DOD# 215), will not activate strobe light on “Info” calls
Power: 120V AC to 12V DC adapter provided
Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft
Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0”)
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -26° to 54°C (-15° to 130° F)
Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
Minimum Loop Current: 15 mA
Minimum Ring Voltage: 25V RMS
Ringer Equivalence: 0.5 A REN
Disable/Info Switch Input: 50mA/80mW maximum
Humidity - BLK-4: 5% to 95% non-condensing
Mounting: Fasten to wall, post, etc. with complete surface mounting hardware included
Connections: Color coded wires with gel-filled butt connectors
Color: Blue
Country of Origin: USA
WARRANTY: ONE-YEAR MANUFACTURER WARRANTY
FINAL SALE/NON-RETURNABLE ITEM
