Viking K-1900812LIPEWP Stainless Steel VoIP Phone w/ EWP - New
Features:
Vandal Resistant Features:
12 gauge (0.105" thick) 316 stainless steel faceplate
Permanent laser etched graphics
Heavy duty metal hook switch
Heavy duty metal keypad
Armored cable with internal stainless steel lanyard
T-10 Security Torx drive mounting screws
Weather Resistant Features:
Marine grade 316 stainless steel faceplate
Marine grade 316 stainless steel Torx security screws
Internally sealed keypad
Equipped with Enhanced Weather Protection (EWP)
Faceplate gasket (on EWP models)
Ring with adjustable volume and cadence
Hearing aid compatible amplified handset with sealed push button volume control
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD 582
SIP compliant
PoE powered (class 1, <4 Watts)
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
Network downloadable firmware
12” armored handset cable with internal stainless steel lanyard for added strength
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Programmable to speed dial up to 250 numbers
26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228
26 Bit Wiegand output connect to card reader input of an Access Control System
Cycles to rollover phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Remotely programmable
Extended temperature range (-40°F to 140°F)
Zinc plated steel rough-in box included
Flush mount with included steel rough-in box, or use an optional VE-5×10 surface mount box (not included, see DOD 424)
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
Diagnostics (for testing relay)
Country of Origin: USA
WARRANTY: ONE-YEAR MANUFACTURER WARRANTY
FINAL SALE/NON-RETURNABLE ITEM
Features:
Vandal Resistant Features:
12 gauge (0.105" thick) 316 stainless steel faceplate
Permanent laser etched graphics
Heavy duty metal hook switch
Heavy duty metal keypad
Armored cable with internal stainless steel lanyard
T-10 Security Torx drive mounting screws
Weather Resistant Features:
Marine grade 316 stainless steel faceplate
Marine grade 316 stainless steel Torx security screws
Internally sealed keypad
Equipped with Enhanced Weather Protection (EWP)
Faceplate gasket (on EWP models)
Ring with adjustable volume and cadence
Hearing aid compatible amplified handset with sealed push button volume control
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD 582
SIP compliant
PoE powered (class 1, <4 Watts)
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
Network downloadable firmware
12” armored handset cable with internal stainless steel lanyard for added strength
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Programmable to speed dial up to 250 numbers
26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228
26 Bit Wiegand output connect to card reader input of an Access Control System
Cycles to rollover phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Remotely programmable
Extended temperature range (-40°F to 140°F)
Zinc plated steel rough-in box included
Flush mount with included steel rough-in box, or use an optional VE-5×10 surface mount box (not included, see DOD 424)
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
Diagnostics (for testing relay)
Country of Origin: USA
WARRANTY: ONE-YEAR MANUFACTURER WARRANTY
FINAL SALE/NON-RETURNABLE ITEM
Features:
Vandal Resistant Features:
12 gauge (0.105" thick) 316 stainless steel faceplate
Permanent laser etched graphics
Heavy duty metal hook switch
Heavy duty metal keypad
Armored cable with internal stainless steel lanyard
T-10 Security Torx drive mounting screws
Weather Resistant Features:
Marine grade 316 stainless steel faceplate
Marine grade 316 stainless steel Torx security screws
Internally sealed keypad
Equipped with Enhanced Weather Protection (EWP)
Faceplate gasket (on EWP models)
Ring with adjustable volume and cadence
Hearing aid compatible amplified handset with sealed push button volume control
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD 582
SIP compliant
PoE powered (class 1, <4 Watts)
Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
Network downloadable firmware
12” armored handset cable with internal stainless steel lanyard for added strength
Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Programmable to speed dial up to 250 numbers
26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228
26 Bit Wiegand output connect to card reader input of an Access Control System
Cycles to rollover phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Remotely programmable
Extended temperature range (-40°F to 140°F)
Zinc plated steel rough-in box included
Flush mount with included steel rough-in box, or use an optional VE-5×10 surface mount box (not included, see DOD 424)
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
Diagnostics (for testing relay)
Country of Origin: USA
WARRANTY: ONE-YEAR MANUFACTURER WARRANTY
FINAL SALE/NON-RETURNABLE ITEM
